MU 306 Lab 2
Due October 17, 2003
The purpose of this Lab is to carefully edit and manipulate text, with three tasks for you to do (everyone must do the same tasks for either option 1 or 2):
1. Clean up and/or fix up the original recording, to make the reading as natural and perfect as possiblecorrect order of words, no bumps, extraneous noises, extra pauses, etc.
Make a different, but still intelligible poem by rearranging
the words make someone say something they didn't really saysuch
that it still sounds natural, but with a different meaning.
Another interesting way to do thischange the prosody
in addition or instead of the word order (see Option 2 below).
Another interesting way to do thischange the prosody in addition or instead of the word order (see Option 2 below).
3. Make a (short) unintelligible abstract from the same source material, for example something rhythmic that uses small fragments of the recording to create a beat.
You can record the original text yourself (option 1), or you have the option of using the prerecorded text I showed you in class (option 2).
If you make your own recording, you will need to record it onto DAT (as you did in HW1), and then transfer it to the computer and work from there in Pro Tools. See Appendix A for details on how to do the transfer.
Option 1: Find someone (or yourself) to read a poem, or short text of some kind. The piece should be around 2-3 minutes in length. Keep recording different "takes" until you are satisfied that you have a usable recording of each line. Try to get a good, clear recording of the speaker's voice. Check your recording for the level of room noise/ambience, and any background noise that may have crept in. And of course, you want to capture a good performance of the reading. The nice thing is that because you have a professional editing system at your disposal, you don't have record a perfect reading all the way through. You can record it in fragments and then assemble it later.
Now transfer your recording on to the computer. When you have all your tracks on the computer, edit the best sections ("takes") to create the perfect performance.
Things to listen for are: smooth transitions between sections, balanced/ consistent volume between sections, any pops or clicks caused by either the speaker or your editing, and finally a flow to the whole piece.
Option 2: Import into Pro Tools the file "MUSIC306 SOURCE" which you will find in the "Mac Extras" folder. This recording is excerpted from So Long and Thanks for All the Fish, by Douglas Adams. (See text below). Try to make this recording as faithful as possible to the original written text. You can easily change the order and the timing between words and phrases to improve the flow. Fix all the false takes to make the narrative identical to the written text. In addition, try to fix the "pops" and any other small problems you may have noticed.
You can also to make subtle changes to improve the prosody (the subtle rhythm and pitch variations of a real speakerthere is clearly more to editing text than simply rearranging the order of the words). This may be difficult to achieve. In this example, the words and phrases are out of order and occasionally repeated. Also, since this option is too easy compared to option 1, you'll find thata word or two are missingsee if you can fix that somehowit's not easy!
Note that the original file is mono, so you don't need to maintain two channels in your edits. If you're recording something yourself, you can do it mono or stereo, as you wish.
"Rob McKenna was a miserable bastard and he knew it because he'd had a lot of people point it out to him over the years and he saw no reason to disagree with them except the obvious one which was that he liked disagreeing with people, particularly people he disliked, which included, at the last count, everybody."
Hand this in by using the DROP BOX folder
in the MUS306 folder in CLASS FILES. Or, if you did NOT use Pro
Tools, hand it in on a burned CD with a hard-copy writeup. The writeup
should explain your mic placement, mic selection (if you did a recording),
and description of edits (especially tricky edits), and general comments on your recording
and editing approach. NO MATTER HOW YOU DID IT, I NEED A WRITEUP!
If you did NOT use Pro Tools, then your writeup must be a lot more
detailed, because I won't be able to see you edits, I will only
have the final results on the CD.
NO MATTER HOW YOU DID IT, I NEED A WRITEUP! If you did NOT use Pro Tools, then your writeup must be a lot more detailed, because I won't be able to see you edits, I will only have the final results on the CD.
APPENDIX A: How to do a digital transfer from DAT to disk using Pro Tools.
1. Make your recording on DAT in the School of Music.
Take it over to the Lab in the Fine Arts Building and put
it in the TASCAM DAT machine in the rack.
(You can also use the rack in B008 over here).
(You can also use the rack in B008 over here).
3. Run Pro Tools LE on the Macintosh next to the rack.
4. Create one or two new audio tracks, and click the Record Enable (rec) button for each track.
5. In the MIX window, set INPUT to S/PDIF for all channels you want to record/transfer. You should see the little meters in the edit window bounce around when you play the DAT.
6. Push the PLAY button on the DAT.
7. In the Transport, push the red RECORD button (it will flash). Then push the play button. You are now recording (doing the transfer).
8. You are now doing a digital transfer. Stop Pro Tools and the DAT when you've finished the transfer.
You're now ready to start editing.
If you get an error: "Unable to allocate disk space. Your disk may be fragmented" try running your session on the other hard drive (not on the internal hard drive). You can do this be selecting "Save Session As..." in the File menu, and selecting the other (external) hard disk. Now open it and try again. It should be OK now.